Cryogenic Deflashing Machine PG-80T Shipped to India for Rubber Parts Deflashing   Nanjing Pege most cost-effective model PG-80T is accepted and welcomed by our client located in New Dehli, India. Cryo deflashing machine model PG-80T has a bigger blasting motor of 5.5KW and 300mm diameter blasting wheel, the process efficiency is very high. While the whole machine cabinet is compact and not too big to save LN2 comsumption. It has good advantage of high performance comparing with the cost. \ Thanks for the trust on our cryogenic deflashing machine, we believe that this cost-effective model will greatly improve the production efficiency of rubber part finishing process.   NANJING PEGE TECHNO MACHINE CO., LTD  

Cryogenic Shotblast Deflashing Machine PG-40T Shipped to Australia for Rubber Parts Deflashing   Cryogenic deflashing machine smallest volume of 40liter is selected by clients in Australia for their rubber parts deflashing machine. BEFORE NITROGEN DEFLASHING AFTER DEFLASHING Cryogenic deflashing machine is a very efficient tool for the massive quantity process of rubber parts deburring. Following is the machine of PG-40T shipped to Australia. CRYOGENIC DEFLASHING MACHINE PG-40T CRYOGENIC DEFLASHING MACHINE PACKING. Nanjing Pege has confidence that the cryogenic deburring machine will help clients to improve the rubber deflashing process.  

Cryogenic Deflashing System Composition and Key Points   A cryogenic deflashing machine is a machine used to remove excess material from molded parts. The process involves using liquid nitrogen to freeze the molded part and then using a blast of air or other media to remove the excess material. This process is often used for rubber, plastic, and metal parts.     A typical cryogenic deburring system includs 3 parts: Low-temp Cooling System (LN2 nitrogen as cooling media) Nitrogen deflashing machine Cyclone Splitter for discharge and dust collection Cryogenic deflashing machine key points to check whether rubber parts suitable for deflashing or not Flash should be thin and if flash shape is flat will be better, standard thickness request is less than 0.15mm. parts should have no fragile edge or sharp point. Besides silicone rubber, other rubber parts will be all suitable. Nannjing Pege Techno Machine Co., Ltd is a professional nitrogen shot-blasting machine for various rubber and plastic components manufacturers all over the world.

New Model of Cryogenic Deflasher PG-40T is Installed and Demonstrated in Chennai, India   Smaller capacity type of cryogenic deflashing machine PG-40T was shippedto Chennai, India, for Nanjing Pege to set up a demo center there. The newly developed small capacity Nitrogen deflashing Machine was well accepted and highly appreciated by local customers. New type of cryogenic shot blasting deflashing machine has following special features: Extremly compact and small machine size and inner chamber to save LN2 use Strong power with a 3.7KW motor, and a 500mm diameter vibrator. High blasting efficiency and flash&media separation performance. Smaller space requirement. Afforable price. Good quality performance as well as reliable processing efficiency. With above good features, PG-30/40T from Nanjing Pege will surely be a popular and reliable tool for customers all over the world.   Following are the photos of machine installation in Chennai.  

Cryogenic Shotblast Deflashing Machine big Capacity PG-120T Shipped to Vietnam   A brand new cryogenic deflashing machine model 120T with a 120liter big barrel capacity shipped to Vietnam to serve the customer for the cryogeni deflashing process for rubber parts. Nanjing Pege Techno Machine Co., Ltd is a reliable and well-known cryogenic deburring machine manufacturer who has nearly 20 years industry experience and pays much attention on the machine details. Cryogenic shotblasting machine will be delivered to a leading and well-know Taiwan rubber parts manufacturer's Vietnam plant, our 120T has a stronger power by using a 7.5KW motor with 350mm diameter blasting wheel to ensure high process efficiency. At the same time, a diameter of 600mm vibration separator is used for flash separation to confirm that the flash and media separation is qucik and efficient. We belive that our cryogenic deflashing system will be a good helper for customer in Vietnam plant. Nanjing Pege will keep it profession and dignity to provide reliable and quality deflashing and rubber cutting related machines for customers in the world range.

Newly Developed Small Size Cryogenic Deflasher PG-30/40T for Small Volume Requst Cryogenic deflashing machines are known for its precise quality de-flashed parts with up to 95% performance output without affecting the final part dimension and shape from small O-rings to big molded parts. These Machines serve the need for Rubber, Metal-Rubber parts, small precision plastic parts and small die-casting parts like Zinc and Magnesium alloy. Single person operation Expertly deflashes parts using cryogenic freezing Separates the sprue and/or waste material from the finished parts Exceptionally fast and automated and safe, improving operational efficiency Provides a pristine quality finish Features of New Samll Model PG-40T Cryogenic Deflasher A.  Compact Deign to Save Location Space. B. Very Suitable for Smaller Rubber Parts Good Deflashing. C.   Lower LN2 Consumption Due to Smaller Machine Cabinet. D.   Powerful Blasting Force by Applying A 3.7KW Blasting Motor with A 250mm Diameter Wheel. E.   Efficient Separation System Suitable for Various Flash Condition. F.    Higher Processing Efficiency Comparing with Same Size from Other Brands.  G.    Famous Brands Components for Electrical and Driving System H.   Affordable Lower Cost. Working principle of rubber nitrogen deflashing machine   With the decrease of the temperature, rubber/plastic parts enter into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed, and the product is not damaged. Functions of rubber cryogenic deflashing machine  Our rubber cryogenic deflashing machine is widely used in removing the flashed of small rubber and plastic parts like O-rings, gaskets and other molded parts. With the cryogenic processing technology, the flashes are firstly freeze and then shot down the high-speed projection media (Polycarbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly. Applications of rubber cryogenic deflashing machine  A. O rings, irregular rubber parts with different material and sizes. B. Micro electronic product parts C. Precision elastomeric parts D. Precision injection moulding plastic parts E. R & D part runs F. Die casting products, like zinc aluminum, magnesium alloy Company profile NANJING PEGE TECHNO MACHINE CO., LTD is a leading quality and customer-oriented manufacturer and supplier who is specialized in providing rubber and plastic industry machines. Rubber sector machines focus on deburring and cutting include cryogenic de-flashing machine, spin trim de-flashing machine as well as rubber strip or gasket cutting machine. Plastic sector machines focus on material precision feeding include the Gravimetric Loss-in-weight feeders and its affiliated system including uploading and supplementary system.  Cryogenic Deflashing Machine aims at realizing faster quality production cycle with least rejection on those parts including rubber molded, plastic injection molded and die-casting components' flashes removal process.  Professional rubber deflashing machine supplier in China, O-ring Deflasing machine supplier in China, Deflashing machine supplier in China, Liquid Nitrogen Cryogenic Deflashing machine supplier in China.

Cryogenic Deflashing Machine Shipped to Mid-East Country for Rubber Rings Deflashing High quality frozen shot cryogenic deflashing machine made in China, from Nanjing Pege, China shipped to mid-east country-Iran for rubber rings deflashing. Cryogenic deburring machine is an idea deflashing method for small precision o rings deflashing process, it is quick, good precision and lower cost. Before Nitrogen Shotblast Deflashing After Cryogenic Shotblast Deflashing After cryogenic deflasing machine, what we get is clean o rings without flashes. And thousands of rings can be deflashed in one cycle. Millions of rings can be deflashed in one day.   Pege always focus on developing and improving the cryogenic deflashing machine for the manufacturers to improve their rubber or plastic parts deburring process. Nanjing Pege is always your reliable partner for rubber cutting and deflashing demands.

Nanjing Pege Cryogenic Deflashing Machines Shipped to Russia for Rubber Deflashing Process   Pegedeflashing is a reputational cryogenic deflashing machine manufacturer in Nanjing, China, with its profession and its integrity on the machine production and mutal cooperation, Nanjing pege already shipped two good quality cryogenic deburring system to Russian customer.   First one was shipped in the year of 2019.   Next one was shipped in the year of 2020.     A new machine of PG-40T cryogenic deflashing machine will leave our factory to Russia soon. Cryogenic deflashing machine nanjing pege is well designed and manufactured with quality, it has the feature good, stable performance, high efficiency and good process precision which is important for the customer end. To improve the deflashing process efficiency and precision is the aim and core purpose of our deflashing machine. We believe that more and more machines will go abroad to realize its value and support the customer to improve the production process and attain more success. Pege will keep our values and keep producing good nitrogen deflashing machines for all the customers in the world.     

Nanjing Pege "Frozen Shot" Cryogenic Deflashing System   Cryogenic deflashing system from Nanjing Pege will be your reliable and capable partner for the process of deflashing and deburring. Nanjing Pege keeps providing quality and well designed&produced cryogenic shotblasting deflashing machine for flash cleaning process for rubber, plastic and die-casting components. Nitrogen deflashing machine has great advantages of high processing quantity and lower deflashing cost for small components. Cryogenic deflashing machine will be a good tool for your production.

Pege Frozen Shot Cryogenic Shotblast Deflashing Machine Installed in Hungary   Great job from our customer in Hungary, Europe, who had finished the cryogenic deflashing system installation by themselves with our online guide. During the Covid-19 pandemic period, though on-site service is not available, cryogenic deburring machines from Nanjing Pege also can be set up smoothly with our detail instruction material. This is a perfect example of simple cryogenic deflashing machine system for rubber components flash removing process. We hope our machine can work well to improve the efficiency and precision of the deburring process. #europe #crogenicdeflashing 

Cryogenic Deflashing Machine Shipped to Slovenia    Cryogenic deflashing machine made by Nanjing Pege Techno Machine Co.,Ltd has been shipped this month to our esteemed customer in EU- Slovenia, serving for the customer to improve the efficiency and precision of removing the small molded rubber parts flashes.  Cryogenic deburring machine is a good way to solve the deflashing problem for rubber, plastic and die-casting parts. PG-60T

Cryogenic Shotblasting Machine Type PG-60T Exported to Australia   Newly manufactured cryogenic deflashing machine type PG-60T has been well packed and shipped to our esteemed customer in Australia. Cryogenic deburring is very efficient and useful for deburring process of peek parts, especially for removing the flashes occur from the process of CNC machining.  After strict sample test and customer's internal quality evaluation, the nitrogen deburring system is proved workable and qualified for trimming plastic peek parts. We believe that  machine from Nanjing Pege will surely help customer to improve the production efficiency and product quality.