Cryogenic Deflashing Equipment,Automatic Freeze Trim Deflashing Machine,Rubber Cutter Machine

Spin Trimming Deflashing Machine PG-ST-377 with Air Blowing Separator PG-AB-377

Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

Tags : spinning trim machine rubber trimming machine Spin Trim Deflashing Machine spin trimming machine rubber deflashing machine O ring deflashing machine
Read More
Liquid Gravimetric Loss in Weight Feeder PG-FL-20

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The gravimetric weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder will be a loss-in-weight system. Parameters/Model PG-FL-05（H) PG-FL-20（H) PG-FL-40（H) PG-FL-80（H) Capacity range 1-5kg/h 4-20kg/h 15-80kg/h 24-120kg/h Hopper Volume 5L 10L 20L 40L Sensor Range 5kg 10kg 20kg 50kg Net Weight 150kg 180kg 200kg 220kg Size (L*W*H) 1125x650x1370 1125x700x1470 1125x750x1570 1125x800x1670 Power AC380V 3ph 0.25kw AC380V 3ph 0.37kw AC380V 3ph 0.55kw AC380V 3ph 0.75kw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight Sensitivity 0.1g 0.1g 0.5g 0.5g   (H) here means Heating function, it is optional.

Tags : Loss-in-weight Feeder Liquid Loss-in-weight feeder Gravimetric Feeder liquid feeder gravimetric liquid feeder Feeder for Extrududer
Read More
Slicone Rubber Strip Cutting Machine PG-SC-600

Silicone Rubber Strip Cutting Machine can cut the silicone compound in a precise and efficient way by length or weight control. Kiss-cutting is available especially for the specific request for silicone rubber sheet. Specification Model                     PG-SC-600 Size                         1040*680*1000mm Material Suitable    Silicone Sheet Power supply         0.93Kw 220V 50-60hz Cutting Length      0.1mm-1000mm, Cutting width        ≤ 550mm, Sheet thickness     ≤10mm Cutting weight      0.1g-1000g Cutting speed        ≤100cut/min Model                     By Weight or By Length Operation Mode     Touch Screen Control Mode         PLC Numerical Controlled

Tags : silicone rubber cutter silicone rubber cutting machine silicone sheet cutter rubber sheet cutting machine rubber sheet cutter Rubber Strip Cutter for silicone rubber
Read More
Silicone Strip Cutting Machine PG-SC-600

Silicone Rubber Strip Cutting Machine can cut the silicone compound in a precise and efficient way by length or weight control. Kiss-cutting is available especially for the specific request for silicone rubber sheet. Specification Model                     PG-SC-600 Size                         1040*680*1000mm Material Suitable    Silicone Sheet Power supply         0.93Kw 220V 50-60hz Cutting Length      0.1mm-1000mm, Cutting width        ≤ 550mm, Sheet thickness     ≤10mm Cutting weight      0.1g-1000g Cutting speed        ≤100cut/min Model                     By Weight or By Length Operation Mode     Touch Screen Control Mode         PLC Numerical Controlled

Tags : rubber sheet cutter rubber sheet cutting machine silicone rubber cutting machine Rubber Strip Cutter silicone rubber cutter silicone sheet cutter
Read More
Air Blow Separator for Spinning Trim Machine PG-AB-377

Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

Tags : spinning deflashing machine spin trimming machine spin trimming deflashing machine air blowing separation rubber deflashing machine Spin Trim Deflashing Machine
Read More
Spinning Deflashing Machine with Vibratory Separator PG-ST-377

Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

Tags : Spin Trim Deflashing Machine spinning deflashing machine rubber deflashing machine O rings deflashing machine spin trimming deflashing machine Orings spin trimming machine
Read More
Liquid Loss in Weight Feeder PG-FL-40

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The gravimetric weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder will be a loss-in-weight system. Parameters/Model PG-FL-05（H) PG-FL-20（H) PG-FL-40（H) PG-FL-80（H) Capacity range 1-5kg/h 4-20kg/h 15-80kg/h 24-120kg/h Hopper Volume 5L 10L 20L 40L Sensor Range 5kg 10kg 20kg 50kg Net Weight 150kg 180kg 200kg 220kg Size (L*W*H) 1125x650x1370 1125x700x1470 1125x750x1570 1125x800x1670 Power AC380V 3ph 0.25kw AC380V 3ph 0.37kw AC380V 3ph 0.55kw AC380V 3ph 0.75kw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight Sensitivity 0.1g 0.1g 0.5g 0.5g   (H) here means Heating function, it is optional.

Tags : Loss-in-weight Feeder Liquid Loss-in-weight feeder Gravimetric Feeder liquid feeder gravimetric liquid feeder
Read More
Spin Trim Deflashing Machine with Vibratory Separator PG-ST-377

Spin Trim Automatic Rubber De-flashing Machine uses the principle of aerodynamic& centrifugal force to remove rubber parts extra flashes automatically with high speed spinning action. This machine can be widely applied for deburring process of silicone rubber, natural rubber, fluorione rubber O rings and irregular parts.    Spin Trim De-flashing Machine Specification Model PG-ST-377 Power Supply 5.5KW 380V 3ph 50/60Hz Size 1890*660*1400mm Basket Diameter Ø 377mm Weight 290kg Gas supply 0.4mpa-0.6mpa Wheel Speed 0-6000rpm Process efficiency about 2kg per min Batch Time 30-50seconds/ batch Flashes Separation Vibrator Separating Operation Mode Touch Screen      

Tags : Spin Trim Deflashing Machine spinning deflashing machine rubber deflashing machine O rings deflashing machine spin trimming deflashing machine spin trimming machine
Read More
Loss in Weight Liquid Feeder PG-FL Series

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The gravimetric weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder will be a loss-in-weight system. Parameters/Model PG-FL-05（H) PG-FL-20（H) PG-FL-40（H) PG-FL-80（H) Capacity range 1-5kg/h 4-20kg/h 15-80kg/h 24-120kg/h Hopper Volume 5L 10L 20L 40L Sensor Range 5kg 10kg 20kg 50kg Net Weight 150kg 180kg 200kg 220kg Size (L*W*H) 1125x650x1370 1125x700x1470 1125x750x1570 1125x800x1670 Power AC380V 3ph 0.25kw AC380V 3ph 0.37kw AC380V 3ph 0.55kw AC380V 3ph 0.75kw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight Sensitivity 0.1g 0.1g 0.5g 0.5g   (H) here means Heating function, it is optional.

Tags : Loss-in-weight Feeder Liquid Loss-in-weight feeder Gravimetric Feeder liquid feeder gravimetric liquid feeder Loss in weight feeder system
Read More
Spinning Trim Deflashing Machine PG-ST-377 with Air Blowing Separator PG-AB-377

Spin trim deflashing machine can spin out the thin or big flashes with high-speed centrifugal spinning force, the parts which have tear trim line will be better, various shape and size parts are suitable. Different with vibratory separation system, air bowing separator use the high-speed air flow to blow out the flashes which are much lighter than the part, the product and flashes can be separated according to the different density and size by using the difference of suspension speed between main part and flashed. Air Blow Separator is a innovative equipment which is develop for supporting for flashes separation process after spin trim deflashing machine. Air blow separator sucessfully solves the problem of flashes mixing together during the spin trim deflashing process.   Air Blowing Separator Model PG-AB-377 Dimension L2060mm*W700mm*H2000mm Power Supply 3KW 380V 50-60HZ. 3PH Machine Frame Tube 40*40mm (Square Tube with Stoving Varnish) Sealing Plate 1.5mm Thickness (Stoving Varnish) Vibrating Hopper Dimension L540*W400*H200mm (Stoving Varnish) Damping Spring Out Ø40mm   Wire Ø 4mm    L 120mm Damping Spring Holder Rubber Dumper Pre-Installed Screw Vibrator Motor 0.12KW High Speed Blower 1.1KW Blower Inverter 1.5KW      Vibrating Hopper Inverter 0.25KW   Air Running Tube 300mm*200mm Adjustable Fuma Wheels 4PCS（LOW NOISE）

Tags : spinning trim machine rubber trimming machine Spin Trim Deflashing Machine spin trimming machine rubber deflashing machine air blowing separator
Read More
Single Screw Gravimetric Loss in Weight Feeder PG-FW-114

Gravimetric loss in weight feeder is an instrument that is important to control and measure the speed of a substance in an instrument system. This equipment can handle the bulk solids. It allows the solid to discharge at a constant weight per unit time. The unit of measurement is kg/min or Kg/hour. The signal about the weight is used as a system of feedback control. It controls and monitors the feed rate that enters a instrument. The weighing systems include several examples such as platform scales, load-cells, weigh hoppers, etc. Depending on the overall process, the gravimetric feeder may be a loss-in-weight system or a gain-in-weight system.   Parameters/Model PG-FW-48 PG-FW-63 PG-FW-89 PG-FW-114 Capacity range 10-100kg/h 50-500kg/h 100-1000kg/h 200-2000kg/h Hopper Volume 40L 80L 150L 350L Load Cell Range 50kg 120kg 300kg 500kg Net Weight 86kg 140kg 170kg 190kg Size 765x490x770 850x575x915 1055x750x1480 1100x800x1500 Power Servo Motor Drive AC380V 3ph Feeding Motor 0.4kw AC380V 3ph Feeding Motor 0.55kw AC380V 3ph Feeding Motor 0.75kw AC380V 3ph Feeding Motor 1.1kw Screw Type spiral screw or solid single screw spiral screw or solid single screw spiral screw or solid single screw spiral screw or solid single screw Dynamic accuracy ±0.5% ±0.5% ±0.5% ±0.5% Min. Weight sensitivity 1g 1g 2g 2g Discharge tube Φ48x3 Φ63x3 Φ89x3 Φ114x3                  

Tags : Gravimetric Feeder Loss-in-weight Feeding Machine Loss in weight weigh feeder loss in weight batch feeder single screw feeder Loss in weight for dosing
Read More
Cryogenic Rubber Deflashing Machine PG-120T

Cryogenic deflashing and deburring is a process that employs cryogenic temperatures to remove flash on manufactured workpieces made of a wide range of rubber and plastic (and other materials) both thermoset and thermoplastic. Some examples of materials used include nylon, Tefzel®, HD-PE, PPS, PET, polycarbonate, polypropylene, polyurethane, liquid crystal polymer, ABS, Peek and Acetal. Manufactured parts that have been successfully deburred include those made through injection molding, compression molding and extrusion molding. Features of Cryogenic Deflashing Machine High Efficiency High Precision Lower Single Deflashing Cost   Automaic, Save Labor Work.

Tags : Cryogenic De-flashing Machine Cryogenic De-burring Machine cryogenic shotblast machine nitrogen deflashing machine cryogenic shotblasting machine blast deflashing machine
Read More

Products