PPS PET and PA parts nitrogen deburring machine   Cryogenic deflashing and deburring system is a process that employs cryogenic temperatures to remove flash on manufactured workpieces made of a wide range of plastics (and other materials) both thermoset and thermoplastic. Some examples of materials used include nylon, HD-PE, PPS, PET, polycarbonate, polypropylene, polyurethane, liquid crystal polymer, PA+GF, PC+GF, PEEK, and Acetal. Manufactured parts that have been successfully deburred include those made through injection molding, compression molding and extrusion molding.    What is “Flash.” “Flash” is a raised edge attached to the workpiece. It is an unwanted piece of material and requires removal. Many medical devices and other precision components are included in deflashing applications. Deburring accounts for a significant amount of the costs of manufacturing. The cryogenic deflashing process causes the flash or burr to become stiff or brittle and break away leaving a clean edge. There are three types of burrs that can be formed in manufacturing operations and can be classified by the physical manner of formation: Poisson burr, roll-over burr and Tear burr. ■Poisson Burr A Poisson burr results from the tendency of a material to bulge at the side when compressed until permanent deformation of the plastic occurs. ■Roll-over Burr A roll-over burr is a burr that is more of a chip that is bent rather that sheared. The resulting burr is usually comparatively larger. The process even removes recessed burrs in blind and through holes. ■Tear Burr A Tear burr is the result of material tearing from a work piece rather than shearing from it. In the cryogenic deflashing process, parts are loaded into a basket. A cryogem such as liquid nitrogen is used to cool the workpieces. After they are cooled they are tumbled with pellets- often a polycarbonate media ranging in size from 0.006 to 0.080 inches (0.15mm to 2.03 mm.) Sometimes cryogenic deflashing does not rely on a blasting action but rather on the tumbling of the parts to remove flash from the outer edges. The process can even remove recessed burrs in blind and through holes. The process does not affect the surface finish or the geometry of the part. Edges are maintained without rounding or removal of extra material and only the unwanted burrs are removed.   Cryogenic Deflashing Systems Advantages Cryogenic deflashing equipements provides advantages over manual deflashing. ■The process maintains part integrity and critical tolerances. As it is a bath process the price per piece is far less as many more parts can be processed at the same time. ■Cryogenic deflashing is non-abrasive. ■As the process is computer controlled, the human operator variable is removed from the process. ■Mold life is extended by the cryogenic deflashing process. Instead of making a new mold a company may choose to deburr a manufactured part cryogenically and achieve the same product quality very much as they would with a new mold for a period of time until maintenance is performed.   Pege’s Automatic Nitrogen Trimming Machine’s Features ■Greater productivity ■Large output in short time ■Better and consistent Finish ■Low Labour dependence ■Space Saving ■Low Media Consumption ■Wide variety of rubber compounds - NR to Silicon Rubber ■Low Nitrogen Usage ■Simple Electrical Controls ■High Efficiency Blast Wheel ■Safety Interlocks ■Simple and Very Low maintenance      

PU TPU TPE parts cryogenic deburring machine   Cryogenic Deflashing or cryogenic deburring is available for all molded parts, including those made of plastics, polymers, nylons, rubbers, silicone rubber, polyurethane, neoprene, liquid crystal polymer, urethane, viton, polycarbonate, PTFE, PPS, delrin, polypropylene, EPDM, nitrile, butyl, DAP, ABS, PEEK, Acetal and aluminum zinc die cast and precision elastomer parts.   Cryogenic Deflashing Works On Most Molded Parts   The computer-controlled process generates repeatable and reliable results. Many medical devices and other high value precision molded components are included in our vast array of successful deflashing applications. We have processed parts manufactured through injection molding, compression molding and extrusion molding. Our cryogenic deflashing machine offers a fast and repeatable process to remove flash from plastic parts. Through freezing, tumbling and blasting polycarbonate media at your injection molded plastic parts, we are able to remove residual mold flash time and time again. The Cryogenic Deflashing process was originally created to remove mold flash from rubber parts. We are able to deflash rubber parts that are injection molded, extrusion molded and compression molded. We have processed parts made of various durometers. We typically deflash rubber parts made of EPDM, neoprene, Viton, Buna-N, nitrile, natural gum, SBR, butyl, and other elastomers. Our Cryogenic Deflashing machine is often used by molders who work with silicone rubber. Silicone rubber, by its nature, is very viscous causing it to flash during the molding process. The Pege’s Deflashing machine removes mold flash from silicone rubber parts. We deflash parts made of liquid silicone rubber and even special blends of silicone rubber that include conductive fillers such as silver, graphite, nickel. Rather than invest in an expensive new or repaired mold tool, customers can elect to extend the functional life of their mold tool by adding the additional step of deflashing, to finish the part and remove any residual flash leftover after molding operations. It is economical to pay only a slight premium per part than to invest in a new molding tool that has a limited production life.   Cryogenic Deflashing is a fast and efficient process that provides complete removal of mold flash without affecting the surface finish. Therefore, it is a safe,clean and cost-effective alternative to traditional methods. Parts are placed in a chamber, cooled, tumbled and impacted with plastic polycarbonate media. Mold flash is removed quickly and cleanly. No dust or residue remains after deflashing. Cryogenic Deflashing is more cost-effective than labor-intensive hand deflashing by a significant margin. The cost to process parts can range from less than .01 cent to several dollars apiece. General rule of thumb: cost is between 10% and 20% of the value of the part, although each part must be considered on its individual   Nanjing Pegedeflashing’s Cryogenic Deburring Machine’s ADVANTAGES Greater productivity Large output in short time Better and consistent Finish Low Labour dependence Space Saving Low Media Consumption Wide variety of rubber compounds - NR to Silicon Rubber Low Nitrogen Usage Simple Electrical Controls High Efficiency Blast Wheel Safety Interlocks Simple and Very Low maintenance   Our factory and Workshop of cryogenic deflashing systems Nanjing Pege Techno Machine Co.,Ltd production plant is located in the No.9 Ankang road, Guli Industrial Zone, Jiangning District, Nanjing.We have professional production workers and process, are determine to produce best product for the customer all over the world   Packing and Transportation of cryogeic deflashing equipments The machine produced by Nanjing Pege is well packed by plywood carton suitable for long distance sea transportation to ensure machine safety and performance. We can help customer to arrange the transportation by the terms of FOB, CIF with land or sea transportation methods according to the request from the 

Cryogenic Deflashing Machine Product and Company Introduction   Cryogenic deflashing machines are known for its precise quality de-flashed parts with up to 95% performance output without affecting the final part dimension and shape from small O-rings to big molded parts. These Machines serve the need for Rubber, Metal-Rubber parts, small precision plastic parts and small die-casting parts like Zinc and Magnesium alloy.   Product Description Working Principle of Rubber Deflashing Machine With the decrease of the temperature, rubber/plastic parts enter into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed, and the product not be damaged.   Specifications Mode PG-40T PG-60T PG-80T PG-100T PG-120T PG-150T Capacity 40Liter 60Liter 80Liter 100Liter 120Liter 150Liter Wheel size 250mm 250mm 300mm 300mm 350mm 350mm   Worldwide Installations of Nanjing Pege Cryogenic Deburring Machine USA, Mexico Australia, New Zealand Poland, Croatia, Slovenia, Hungary, Greece Russia Malaysia, Thailand, Vietnam, India   FUNCTIONS of cryogenic trimming machine Our rubber deflashing machine is widely used in removing the flashed of small rubber and plastic parts like O-rings, gaskets and other molded parts. With the cryogenic processing technology, the flashes are firstly freeze and then shot down the high-speed projection media (Polycarbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly. Product Specification / Models   APPLICATIONS of cryogenic deflashing machine A. O rings, irregular rubber parts with different material and sizes. B. Micro electronic product parts C. Precision elastomeric parts D. Precision injection moulding plastic parts E. R & D part runs F. Die casting products, like zinc aluminum, magnesium alloy   FEATURES of cryogenic deburring machine High efficiency: The machine can replace about 60-80 worker to removing the flashes. High precision: It can remove small and hardened flashes which cannot be removed by handworkers and improve precision of the products. Low cost: It also has a feature of lower cost comparing with processing the parts by handworkers.   Nanjing Pege Techno Machine Co.,Ltd production plant is located in the No.9 Ankang road, Guli Industriall Zone, Jiangning District, Nanjing. We have professional production workers and process, are determing to product best product for the customer all over the world The cryogenic deflashing machine produced by Nanjing Pege is well packed by polywood carton suitable for long distance sea transpotation to ensure machine safety and performance. We can help customer to arrange the transportation by the terms of FOB, CIF with land or sea transportation methods according to the resuqest from the customer.

The definition, principal, and composition of a typical Cryogenic Deflashing Machine A cryogenic deflashing machine, also known as a cryogenic deburring system, is a type of equipment used to remove excess material or flash from molded or machined parts. Cryogenic deflashing is a process that involves the use of extremely low temperatures to freeze the parts and then removing the flash using various methods. The cryogenic rubber deflashing machine typically consists of a large chamber or tub where the parts are placed. Liquid nitrogen  is used to rapidly cool the parts, making them brittle. Once the parts are sufficiently cooled, they are subjected to tumbling or blasting action, which causes the brittle flash to break off from the parts. The rubber or plastic flash is then separated from the parts using air, vibration, or other means. Cryogenic deflashing is commonly used in industries such as automotive, aerospace, electronics, and medical devices, where precision and cleanliness are critical. It is an effective and efficient method for removing flash from complex-shaped parts without damaging the component itself. Moreover, cryogenic deflashing is considered to be environmentally friendly compared to traditional methods that involve the use of harsh chemicals or mechanical trimming. Pegedeflashing is a leading supplier of various type of cryogenic deflashing machines.

Cryogenic Deflashing is a Good Method for Rubber Deflashing   Cryogenic deflashing is considered a good method for rubber deflashing due to several reasons: 1.     Precision: Cryogenic deflashing process is a controlled process that can remove flash from rubber components with high precision. It targets the unwanted excess rubber precisely without damaging the desired part geometry. This ensures consistent and accurate results. 2.     Non-destructive: Cryogenic deflashing machine is a non-destructive process, meaning it does not damage or weaken the rubber components during deflashing. This is important for maintaining the structural integrity and functionality of the parts. 3.     Versatility: Cryogenic deburring can be used for a wide range of rubber components, regardless of their shape, size, or complexity. It is suitable for both simple and intricate parts, making it a versatile option for various rubber products. 4.     Efficient: nitrogen shotblast deflashing is a relatively fast process, allowing for high-volume production. The use of liquid nitrogen or other cryogenic media rapidly freezes the rubber parts, and subsequent tumbling or blasting breaks off the flash, ensuring efficient deflashing. 5.     Environmentally-friendly: Cryogenic rubber deflashing is an environmentally-friendly process compared to traditional deflashing methods. It does not involve the use of harsh chemicals or generate harmful waste. Cryogenic media, such as liquid nitrogen, evaporates during the process, leaving no residue behind. 6.     Cost-effective: While cryogenic shotblast deflashing may initially require an investment in specialized equipment, it can be a cost-effective solution in the long run. It reduces labor-intensive manual deflashing and minimizes the need for post-production rework or scrap due to damaged parts. Overall, cryogenic deburring offers advantages in terms of precision, non-destructiveness, versatility, efficiency, environmental impact, and cost-effectiveness, making it a favorable choice for rubber deflashing processes in various industries. Nanjing Pege Techno Machine is one of the top cryogenic deflashing machine manufacturers in the world. 

Cryogenic Deburring or Deflashing Machine Suitable for Deburring Process of Various Components   Cryogenic deburring deflashing machine is specially applied into the various industries including Rubber like rubber rings, sealings, gaskets, bumpers, silicone parts deflashing, engineering thermoplastic like PA+GF PC+GF PPS POM PET PTFE PEEK deburring,thermoelastomer like TPU TPE TPR TPV TPE parts trimming and diecasting part like Zinc alloy and Mag alloy parts flash cleaning. We can get a prefect result after cryogenic deburring, take a look at the following photos. Nanjing Pege will be happy to provide best cryogenic shotblasting machine for your components precision process. 

Pege Cryogenic Deflashing Machine for PEEK Implants Deburring Process As a precision plastic parts deburring solution,cryogenic deflashing machine from Nanjing Pege plays an important role in trimming plastic parts including PEEK or PE material medical inplant device or components. Have a check on the perfect deflashing examples of CNC maching PEEK inplant components.